TEREX PT50 MULTI TERRAIN LOADER

TEREX PT50 MULTI TERRAIN LOADER

Current hours on machine 3279hrs

Machine is in good working order and been through our workshop inspection. New set of tracks, Perkins engine and a 4 in 1 bucket with teech.

Unit is ready for inspection at Mech-N-Air in Campbellfield

Specification

Engine
Make Perkins
Model 404D-22
Gross Power 50 hp 37.3 kw
Power Measured @ 2800 rpm
Peak Torque 105 lb ft 142.4 Nm
Number of Cylinders 4
Displacement 134 cu in 2.2 L
Aspiration Natural
Operational
Operating Weight 6200 lb 2812.3 kg
Fuel Capacity 13.7 gal 51.9 L
Cooling System Fluid Capacity 2 gal 7.6 L
Engine Oil Capacity 2.8 gal 10.6 L
Hydraulic System Fluid Capacity 8 gal 30.3 L
Operating Voltage 12 V
Alternator Supplied Amperage 65 amps
Max Speed – low range 8 mph 12.9 km/h
Undercarriage
Ground Contact Area 1770 in2 1.1 m2
Ground Pressure 3.5 psi 24.1 kPa
Number of Track Rollers per Side 12
Length of Track on Ground 4.9 ft in 1499 mm
Width of Track 15 in 381 mm
Loader
Operating Load 1900 lb 861.8 kg
Tipping Load 3800 lb 1723.7 kg
Hydraulic
Pump Flow 16.3 gal/min 61.7 L/min
Relief Valve Pressure 3000 psi 20684.3 kPa
Dimensions
Width Over Tracks 5 ft in 1524 mm
Length w/ Bucket 10.7 ft in 3251 mm
Length w/o Bucket 8.3 ft in 2540 mm
Height to Top of Cab 6.4 ft in 1956 mm
Ground Clearance 12 in 305 mm
Clearance at Max Lift and Dump 7.6 ft in 2311 mm

Contact Information

This machine has been serviced and inspected in the Mech-N-Air workshop by our fully qualified technicians.

129-133 Somerset Road, Campbellfield Vic 3061
PHONE:
(03) 9359 2039
EMAIL:
admin@mechnair.com.au

Message to Vender

Your Name (required)

Your Email (required)

Subject

Your Message

+gst $35 100
Make Terex
Model PT50
Item Condition Used
Stock Number 52879
Hours 3279
Financing calculator
Vehicle price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Calculate
Monthly Payment
Total Interest Payment
Total Amount to Pay